-
- 直径：430mm，适配国内主流大马力重卡离合器压盘与飞轮
- 花键规格：常见为 24 齿 / 50.8mm 内孔，匹配法士特等主流变速箱输入轴
- 减震结构：多组大刚度减震弹簧，具备两级 / 三级减震功能，可有效吸收发动机扭矩波动与传动冲击，保护变速箱齿轮
- 摩擦材料：金属陶瓷 + 铜基混合摩擦片，耐高温、抗烧蚀、耐磨寿命远高于普通有机摩擦片
-
核心优势
- 高耐热性：陶瓷摩擦片可承受长期半联动、重载起步带来的高温，不易出现烧蚀、打滑失效
- 抗冲击性：宽体矿用自卸车频繁重载起步、坡道起步工况下，抗冲击能力强，不易碎裂或分层
- 高扭矩容量：适配 450-600 马力发动机，额定扭矩可达 2200-3200N・m，满足重载运输需求
- 低磨损特性：优化的摩擦系数设计，减少半联动时的材料损耗，延长使用寿命
-
适配场景
- 宽体矿用自卸车：同力、徐工、临工、宇通等品牌的矿用自卸车
- 干线物流重卡：东风天龙、陕汽德龙、重汽豪沃等大马力牵引车 / 自卸车
- 工程车辆：重载自卸车、混凝土搅拌车、港口牵引车等频繁起步工况
⚠️ 关键注意事项
- 安装时需与对应型号的压盘、飞轮匹配，避免因尺寸 / 扭矩不匹配导致打滑、起步发抖
- 更换时建议同时检查分离轴承、压盘膜片弹簧状态，避免二次返工
- 重载工况下，建议配合正确的驾驶习惯（避免长时间半联动、猛抬离合），可大幅延长使用寿命
- High heat resistance: The ceramic friction lining can withstand high temperatures caused by prolonged half-clutch operation and heavy-load starting, and is less prone to burnout or slippage failure
- High impact resistance: Excellent impact resistance under frequent heavy-load starting and hill-start conditions of wide-body mining dump trucks, resistant to cracking or delamination
- High torque capacity: Compatible with 450-600 horsepower engines, with a rated torque of up to 2200-3200N·m, meeting the demands of heavy-duty transportation
- Low wear characteristics: Optimized friction coefficient design reduces material wear during half-clutch operation, extending service life
- Wide-body mining dump trucks: Mining dump trucks from brands such as Tongli, XCMG, SDLG, and Yutong
- Trunk logistics heavy trucks: High-horsepower tractors/dump trucks such as Dongfeng Tianlong, Shaanxi Automobile Delong, and Sinotruk Howo
- Engineering vehicles: Heavy-duty dump trucks, concrete mixers, port tractors and other vehicles operating under frequent starting conditions
- Must be matched with the corresponding model of pressure plate and flywheel during installation to avoid slippage or starting vibration caused by mismatched size/torque
- It is recommended to check the condition of the release bearing and pressure plate diaphragm spring at the same time during replacement to avoid rework
- Under heavy-duty conditions, it is recommended to use correct driving habits (avoid prolonged half-clutch operation and sudden clutch release) to significantly extend service life
细节
